User Manual: X-Series Rev A AiO Touchcomputer
SW602213 Rev A, Page 21 of 51
6. Select Inject Language and the following UI will be presented.
7. Click the drop-down list and select the preference language.
8. Click Inject Selected Language
9. While the injecting process is performing, DO NOT use your keyboard or mouse
during this time. It may cause an error in the language injection process.
10. After the language package is installed correctly, press any key to exit the window.
11. You should see the new injected language in both “Selected Language” and
“Injected Language”.
To Next Page
Loading...
