Elo Touch Solutions 15” X-Series - Page 40

User Manual: X-Series Rev A AiO Touchcomputer
SW602213 Rev A, Page 40 of 51
Barcode Reader KIT (E093433)
You can optionally add a BCR KIT to the X-Series touchcomputer to any of the three mounting
locations located on the display head top, left, and right of the touchcomputer
The BARCODE SCANNER peripheral shall consist of a mechanical housing, which encloses a
BARCODE SCANNER electrical module. The BARCODE SCANNER peripheral shall have a
USB connection to interface with the X-Series touchcomputer.
Feature
Spec Description
Light Source
660nm visible LED
Optical sensor
2500 pixels Toshiba CCD sensor
Resolution
3 mil
Depth of Field
35 – 320mm
PCS
30% or more
Interface type
USB HID / RS-232 (TTL)/ KBW
Voltage
+ 5V DC ± 5%
Power
120mA @ 5VDC (typ.)
Standby currents
20 ~ 30 mA
Scanning Speed
Up to 270 scans/sec
Operating temperature
0 °C to 55 °C
Storage temperature
-20 °C to 60 °C
Humidity
10% ~90% RH (non-condensing)
Ambient Light
Works in any lighting conditions, from 0 to 10,000 lux
BCR allocation on X-Series