Elster Instromet 6 Series - Page 12

Application and Operation
3
Page 12 of 38
Safety Instructions
UFM Series 6
 Additional label information depending on the applicable approval
(see following label examples)
Please see below for an explanation of each label type using an Ultrasonic
Flow Meter Series 6 Q.Sonic
Plus
model as an example.
ATEX Certification
The explosion proof housing has the following ATEX certification
information:
 Classification: Ex II 2 G Ex d ia [ia] IIB+H2 T6 Gb IP66
 -50 °C ≤ Tamb ≤ +60 °C
 ATEX markings:  II 2 G 0044
o 0044 is the Notified Body number of DEKRA
Certification B.V.
 ATEX certificate reference: DEKRA 11ATEX0170 X
 Warning: Read instruction manual before operating device
Figure 3-2: Example of an ATEX Label
IECEx Certification
The explosion proof housing has following IECEx certification information:
 Classification: Ex d ia [ia] IIB+H2 T6 Gb IP66
 -40 °C ≤ Tamb ≤ +60 °C
 IECEx certificate reference: IECEx DEK11.0062 X
 Warning: Read instruction manual before operating device