4 A1120/40 Users Manual - Chapter 3
__________________________________________________________________________
2.2 CE Mark
A1120/40 meters and their internal modules delivered to customers for use in European
Economic Area (EU & EFTA) countries are CE marked to indicate compliance with the
requirements of the Electromagnetic Compatibility Directive.
This compliance has been demonstrated by subjecting representative samples of the
product, installed in accordance with the instructions and guidelines given in this document,
to the tests prescribed in the following standards:
EN 61036: 1996, Alternating current static watt-hour meters for active energy
(Class 1 and 2)
EN 50081 - 1: 1992, Electromagnetic compatibility generic emission standard -
Part 1: Residential, Commercial and Light Industry
EN 50082 - 1: 1992, Electromagnetic compatibility generic immunity standard -
Part 1: Residential, Commercial and Light Industry
EN 60687 1992, Alternating current static watt-hour meters for active energy -
(Class 0.2s and 0.5s)
The user can therefore be confident that, provided the guidelines and instructions are
properly followed, all units installed will satisfy the requirements for residential, commercial
and light industrial premises.
Elster Metering Systems holds on record the appropriate Declaration of Conformity and
supporting documentation, against which the CE mark is affixed.
© Elster Metering Limited - M181 001 4A - 5/2007 DRAFT
To Next Page
Loading...
Need help?
General
