Need help?Do you have a question about the Elster EK260 and is the answer not in the manual?
General| Power supply | Battery or external power supply |
|---|---|
| Temperature range | -25°C to +55°C |
| Display | LCD |
| Operating Temperature | -25°C to +55°C |
| Storage Temperature | -40°C to +70°C |
| Voltage Range | 3.6 V (battery operation) |
| Communication Interface | RS232, RS485 |
| Weight | 1.5 kg |
Describes the physical controls and display on the EK260 front panel for operation.
Outlines the different access levels (locks) and their priority for controlling parameter changes.
Explains how to view and interpret device status messages, alarms, and warnings.
Lists parameters for configuring serial interfaces (RS-232, RS-485, Modbus, GSM modem).
Specifies operating conditions and conversion methods, including S-Gerg-88 and AGA-NX19.
Outlines requirements and suitability for applications in Ex Zone 1 and Zone 2 hazardous areas.
Details configuration for various Interface 2 applications like modems, FE260/FE230 expansions, and printers.
Provides a step-by-step guide for installing the EK260 device.
Details the procedures and diagrams for mounting the EK260 unit on a wall or meter.
Covers essential guidelines for connecting and grounding cables to prevent interference and ensure safety.
Details connection diagrams for various serial interface configurations like modems, printers, and FE expansions.
Provides a detailed procedure for replacing the EK260's batteries safely and correctly.
Contains the manufacturer's declaration that the product conforms to relevant EC directives and standards.
Presents the EC Type-Examination Certificate for Ex Zone 1 hazardous area applications.
To Next Page
