To Next PageTo Next Page
Need help?Do you have a question about the Elster TRZ2 and is the answer not in the manual?
General| Gas Type | Natural gas, other non-corrosive gases |
|---|---|
| Meter Body Material | Aluminum |
| Communication | Optional M-Bus, pulse output |
| Power Supply | Battery (lithium) or external power supply |
| Dimensions | Varies depending on the model |
| Weight | Varies depending on the model |
Details the intended applications for calibratable and non-calibratable metering.
Lists applications and gases for which the product is not suitable.
Specifies technical details for LF and HF pulse generators.
Details specifications for the Absolute ENCODER S1.
Illustrates effects of flow disturbances and required inlet/outlet sections.
Checklist of items to verify before installing the meter.
Lists suitable seals and gaskets for installation based on DN.
Details requirements for hexagon screws/nuts and stud bolts for flanges.
Instructions on meter installation position and orientation.
Notes on HF pulse generator installation by customer service.
Description of the standard mechanical roller index.
Description of the S1V index with top reading.
Description of the MI-2 index with aluminium cover and desiccant.
Details on the optional Absolute ENCODER S1 and its connections.
Steps to take before initiating the commissioning process.
Procedure for filling the system and initial operation.
Instructions for lubricating meters equipped with an oil pump.
Specific lubrication quantities, types, and intervals for different conditions.
