Do you have a question about the Elster EK280 and is the answer not in the manual?
Accuracy Class | 1.0 |
---|---|
Display | LCD |
Voltage Range | 3.6 V DC |
Gas Type | Natural gas |
Temperature Measurement | Integrated temperature sensor |
Power Supply | Battery-powered |
Approvals | ATEX |
Measurement Range | Dependent on sensor |
Weight | Approximately 1.5 kg |
Current Range | Not applicable |
Frequency | Not applicable |
Provides information for safe and efficient use of the device, including compliance with safety guidelines.
Details current warranty provisions available online for general terms and conditions.
Information on technical support and repairs provided by the customer service team.
Explains the meaning of symbols used in the manual, particularly for safety information.
Outlines the manufacturer's limitations of liability for damages resulting from improper use.
States that the manual is copyright-protected and intended for internal use only.
Lists the items included in the EK280's scope of delivery.
Provides information on spare parts, accessories, and the 'enSuite' program.
Details storage conditions, including temperature and humidity, to prevent damage.
Overview of safety aspects for personnel and smooth operation, suitability for explosive atmospheres.
Describes the device's design for its intended use and the consequences of misuse.
Defines qualifications for personnel performing works on or with the device.
Specifies the requirement for wearing personal protective equipment when working on the device.
Details specific risks associated with batteries and flammable substances.
Provides precautions for handling environmentally hazardous substances like batteries.
Outlines the operator's responsibilities regarding safety, regulations, and device maintenance.
Provides general physical dimensions and operating temperature ranges for the EK280.
Details battery and external power supply specifications for models without an integrated unit.
Specifies power supply details for models with an integrated power supply unit.
Technical specifications for CT30 and Type 17002 pressure sensors.
Specifies the measuring range and uncertainty of the temperature sensor.
Details specifications for LF pulse, HF pulse, and encoder inputs.
Provides nominal data and specifications for LF and HF pulse or signal outputs.
Details serial optical, serial electrical, and integrated modem interface specifications.
Specifies environmental conditions such as temperature range and relative humidity.
Describes the EK280 type label and ATEX marking.
Illustrates and labels the external components and connections of the EK280.
Illustrates and labels the internal connections and components of the EK280.
Provides a brief overview of the EK280's function as an explosion-protected electronic device.
Lists the possible connections for batteries, power supply, inputs, outputs, and interfaces.
Instructions for mounting the EK280 on a gas meter, pipeline, or wall.
Detailed instructions for connecting the EK280 to various components and interfaces.
Guidance on configuring measurement parameters, sealing, and verifying assembly.
Safety precautions related to personal protective equipment when operating the device.
Defines authorized personnel groups (instructed, qualified, calibration officers) for operation.
Explains operation using front panel controls, display layout, and button functions.
Details the content of registers like Main, Cust., Admin, Serv., and Ctrl.
Safety warnings concerning electrical current, personnel, and environmental protection during maintenance.
Procedures for changing and connecting device batteries and entering battery capacity.
Safety instructions for personnel and proper elimination of faults.
Lists fault and status messages with their meaning and recommended actions.
Catalog of spare parts, accessories, fastening elements, and pressure connections.
Provides the EC Declaration of Conformity for the EK280.
Presents the ATEX Type Examination Certificates for Zone 1 and Zone 2.