Elster EK280 - Serv. Register (Service)

Operation 73
6.4.5 "Serv." register (service)
This register is used to display, check and configure special device settings
and conditions. This application is only intended for service technicians
(specialists) or a calibration officer for putting the device into operation or
maintenance.
Display
Meaning
Volume
Sub-menu for volume and the corresponding parameters
Volume conversi-
on
Sub-menu for volume conversion and the corresponding
parameters
Measured values
Sub-menu for analog measurements and the correspond-
ing parameters
Archives
Sub-menu for existing archives in the device
Status
Sub-menu for current status, status register and logs
Date and time
Sub-menu for date, time and the corresponding parame-
ters
Batteries
Sub-menu for device battery and the corresponding pa-
rameters
Inputs
Sub-menu for inputs and the corresponding parameters
Outputs
Sub-menu for all outputs and the corresponding parame-
ters
Interfaces
Sub-menu for device interfaces
Device settings
Sub-menu for all device settings
Identification
Sub-menu for the identification of the gas system
Edit and delete
Sub-menu to activate a range of delete functions
Examination
Sub-menu with freeze function and archive with frozen
data
Data book
Sub-menu with information from the device data book