Elster EK280 - Cust. Register (Customer)

70 Operation
6.4.3 "Cust." register (Customer)
This register is used to display and check special device settings and con-
ditions. This application is provided for gas customers.
This register can be freely programed by the user via the enSuite configu-
ration software.
The following parameters are programed in-house:
Display
Meaning
Unit
Access
Address
Time
Date and time
-
-
1:400
Vb
Volume at base conditions
m
3
C
2:300
Vm
Volume at measurement conditi-
ons
m
3
C
4:300
p
Pressure
bar
-
7:310_1
T
Temperature
°C
-
6:310_1
K
Compressibility ratio factor
-
-
8:310
C
Conversion factor
-
-
5:310
SReg
Status register (total)
-
-
1:101
VbMP
Maximum measurement period
counter Vb in the current month
-
-
3:161
VbDy
Maximum daily counter Vb in the
current month
-
-
4:161
Qb
Flow at base conditions
m
3
/h
-
2:310
Qm
Actual flow rate
m
3
/h
-
4:310
6.4.3.1 Time - Date and time
The displayed time is updated every 30 seconds in battery mode and every
2 seconds in power supply operation.
6.4.3.2 Values from the "Main" register
Vb – Volume at base conditions, see chapter 6.4.2.1
Vm – Volume at measurement conditions, see chapter 6.4.2.2
p – Gas pressure, see chapter 6.4.2.3
T – Gas temperature, see chapter 6.4.2.4
K – Compressibility ratio factor, see chapter 6.4.2.5
C – Conversion factor, see chapter 6.4.2.6