Elster V100 User Manual

INSTALLATION INSTRUCTIONS
The Kent Range of Domestic Meters
V100, V110 & V200
Volumetric in-line cold water meters
All Elster water meters are manufactured and tested in
accordance with either BS5728 or BSEN14154 according to
the appropriate type approval and comply with the relevant
UK Weights and Measures regulations. The meters are
suitable for cold potable water up to a temperature of 30ºC
and working pressure of 16 bar (10 bar only for V110).
If the meter has been provided with an encoded register,
please refer to the appropriate additional instructions:
1. Electronic Meter Reading (EMR) Installation Instructions
ref. 8593D9791.
2. Electronic Meter Reading (InVISION EMR) Installation Instructions
ref. 8505A2750.
The meter must be fully flooded with clean cold water at all times.
No air or water/air mixtures should be allowed
to flow through the meter, otherwise errors
and damage may result.
20724 V100, V110, V200 Inst Instr EN Master AW.indd 1
28/02/2013 13:02

Elster V100 Specifications

General

Type	Volumetric Water Meter
Body Material	Brass
Pressure Rating	PN16
Installation	Horizontal or Vertical
Maximum Working Pressure	16 bar
MID Approval	Yes
Pulse Output	Optional
Application	Residential and Commercial
Maximum Water Temperature	90°C
Size Range	DN15, DN20, DN25, DN32, DN40
Temperature Range	Cold Water: Up to 30°C, Hot Water: Up to 90°C

Summary

Handling, Storage, and Installation

Storage

Guidelines for storing meters, specifying temperature range 5-10°C and avoiding sunlight/heat.

Installation

Instructions for connecting the meter to pipes, compliance, and ensuring frost protection.

Earthing Caution

Advice on consulting rules for using water pipes for earthing and fitting a permanent shunt.

Meter Installation and Commissioning

Meter Installation Instructions

Detailed steps for installing the meter, including pipe flushing and coupling.

Start-up Procedure

Steps for commissioning the meter, including expelling air and checking flow.

Installation Leakage

Procedure to follow if leaks are detected at connections after installation.

Meter Reading

Mechanical Register

Explanation of how to read mechanical meters, differentiating cubic metres and litres.

Electronic Register

Guide to reading electronic meter displays, including billable units and sub-units.

Display Modes

Description of meter display modes, such as self-checking and alert status.

Special Installation and Maintenance Instructions for Polymer Bodied Meters

Health and Safety Information

Health and Safety at Work Act 1974

Information regarding product safety and compliance with relevant regulations and standards.

Product Handling and Use

Guidelines for competent installation, handling, and use of products as per engineering practice.

Compliance and Declaration

Measuring Instruments Directive 2004/22/EC

Information on the declaration of conformity for meters bearing the CE verification mark.

Declaration of Conformity

Formal declaration by Elster Water Metering Limited for V100, V110 & V200 meters.