Need help?Do you have a question about the Elster EnCal 3000 and is the answer not in the manual?
General| Type | Gas Chromatograph |
|---|---|
| Input Voltage | 24 VDC |
| Operating Temperature | -20°C to +60°C |
| Storage Temperature | -40°C to +85°C |
| Humidity | 5% to 95% non-condensing |
| Display | LCD with Backlight |
| Enclosure Rating | IP66 |
| Hazardous Area Approvals | ATEX, IECEx |
| Application | Natural Gas Analysis |
| Measurement Principle | Gas Chromatography |
| Communication Protocols | Modbus, Ethernet |
| Frequency | N/A (DC Power) |
| Power Consumption | 25 W (typical), 50 W (max) |
Details the controller's role, displays, data logging, error indications, and DSfG interfaces.
Explains the function and colors of the status LED and calibration switch.
Explains how to navigate menus and understand displays and dialogs.
Instructions on how to access and view the gas quality module's error listing.
Procedure to accept gas quality errors from the error listing.
Method for checking all parameter settings using GW-GNET+ and a PC.
Explains the function of the Gas Quality module and its components.
Describes the function of the data logging module and archive groups.
Explains the signaling and monitoring tasks of the Monitoring module.
Explains the function of the Integrated RDT module for data connection.
Outlines the functions of the System module, including inputs, outputs, DSfG, TCP/IP, and locks.
Explains the DSfG protocol and its role in data communication and interfacing.
Steps to create and export a device parameterization using GAS-WORKS.
Guidance on connecting transmitter, supply, signal, and data lines.
Step-by-step guide for replacing the device's battery.
To Next Page
