Eltax AVR-800 User Manual

Remote Control Unit
12
By using the provided remote control unit, the receiver can
be controlled from your listening position.
To use the remote control unit, point it at the REMOTE
SENSOR window of the receiver.
Notes:
< Even if the remote control unit is operated within the
effective range, remote control operation may be
impossible if there are any obstacles between the unit
and the remote control.
< I f the remote control unit is operated near other
appliances which generate infrared rays, or if other
remote control devices using infrared rays are used near
the unit, it may operate incorrectly.
Remove the battery compartment cover.
Insert two "AA(UM-3, R6)" dry batteries.
Make sure that the batteries are inserted with their
positive "+ "and negative "_ "poles positioned correctly.
Close the cover until it clicks.
< If the distance required between the remote control unit
and main unit decreases, the batteries are exhausted.
In this case replace the batteries with new ones.
3
2
1
Precautions concerning batteries
< Be sure to insert the batteries with correct positive " + "
and negative "
_
" polarities.
< Use batteries of the same type. Never use different types
of batteries together.
< Rechargeable and non-rechargeable batteries can be
used. Refer to the precautions on their labels.
< When the remote control unit is not to be used for a long
time (more than a month), remove the batteries from the
remote control unit to prevent them from leaking. If they
leak, wipe away the liquid inside the battery
compartment and replace the batteries with new ones.
< Do not heat or disassemble batteries and never dispose
of old batteries by throwing them in a fire.
REMOTE
SENSOR
REMOTESENSOR window
of the receiver
Remote sensor
Battery lnstallation

Eltax AVR-800 Specifications

General

Brand	Eltax
Model	AVR-800
Category	Stereo Receiver
Language	English