Eltax AVR-800

Specifications
26
Amplifier Section
Output Power
Stereo Mode : 120W/CH
(1% THD 1KHz 8ohm DIN)
Surround Mode : 92W/CH
(1% THD 1KHz 8ohm DIN)
THD : 0.01%
DOLBY DIGITAL Mode:
Surround : 0 ~ 15 ms
Center : 0 ~ 5 ms
Back surround : 0 ~ 20 ms
DOLBY PRO LOGIC Mode (Surround):
Music : 0~5 ms
Movie : 10~25 ms
Emulation : 10~25 ms
Frequency Response:
*
LINE: 10 Hz 70 kHz, +1/ 3 dB
Signal-to-Noise Ratio:
*
LINE: 100dB (IHF-A)
Tone Control:
BASS: ± 10 dB at 100 Hz
TREBLE: ± 10 dB at 10 kHz
Digital Audio Section
Sampling Frequency: 32 kHz, 44.1 kHz, 48 kHz, 96 kHz
DIGITAL Input Level/Impedance:
DIGITAL 1, 2 (OPTICAL): 15 dBm 21 dBm
DIGITAL 3 (COAXIAL): 0.5 Vp-p / 75 ohms
FM Tuner Section
(Without notes 100.1 MHz, 65 dBf)
Tuning Range:
87.5 MHz 108.0 MHz (50 kHz steps)
Usable Sensitivity (IHF):
Mono: 11.2 dBf
50 dB Quieting Sensitivity:
Mono: 15.3 dBf
Stereo: 38.5 dBf
Capture Ratio:2.0 dB
Image Rejection Ratio:45 dB
AM Suppression Ratio: 55 dB
Total Harmonic Distortion (1 kHz):
Mono: 0.2%
Stereo: 0.3%
Frequency Response:30 Hz 15 kHz, +1/ 1.5 dB
Stereo Separation (1 kHz): 40 dB
Signal-to-Noise Ratio:
Mono: 70 dB
Stereo: 65 dB
AM Tuner Section
Tuning Range:
522 kHz 1,620 kHz (9 kHz steps)
Usable Sensitivity:55 dB/m
Total Harmonic Distortion:0.8% at 85 dB/m
Signal-to-Noise Ratio: 45 dB at 85 dB/m
Video Section
Input Sensitivity/Impedance: 1.0 Vp-p/75 ohms
Output Level/Impedance: 1.0 Vp-p/75 ohms
General
Power Requirements:
230 V AC, 50 Hz
Power Consumption:
320W
AC Outlets:
Switched x 1, 100 W max.
Dimensions (W x H x D)
435 x 165 x 350 mm (17-1/8" x 6-1/2" x 13-3/4")
Weight (net):12Kg
Standard Accessories:
AM Loop Antenna x 1
FM Antenna x 1
Remote Control Unit x 1
Ower s Manual x 1
*
LINE means CD, TAPE, VCR/VID 1, TV/VID 2, AUX/VID 3 and
DVD/CD.
< Improvements may result in specifications and features
changing without notice.
< Illustrations may differ slightly from production models.