User Manual THEIA HE-t String Inverters 357115.013
,
Issue 1.0, 2011 April
53
6.2.3. Setup
Displays settings and data from the inverter,
the grid and the PV plant.
Up or Down - Navigate through the settings
Enter – Select value/confirm
NOTICE!
Plant Status is reserved for future firmware upgrade functions, and is not yet accessible.
General Setup
Displays some of the general parameters of the inverter, which can all be changed using the
Owner password.
Language
The preferred language is set during installation
Date and time
Date and time set during installation
Password
Owner password; default is 0003.
CO
2
Rate
Avoided CO
2
emissions; based on 0.7 kg/kWh
Earnings Rate
Feed-in tariff in the respective country
Earnings Currency
Valid currency in the respective country (three letters)
Network Setup
Displays the settings for the connected network, which can all be changed with the Owner
password. See 6.3. Connection between Inverter and Computer.
IP-Address
Unique network address for the inverter
Subnet Mask
Sub-network address; first part of the IP-address
Gateway
Network point acting as entrance to another network
Master Setting
With several inverters connected together, one inverter must be the
master and the rest of the inverters slaves
photovoltaikforum.com
To Next Page
Loading...
Need help?
General