Flatpack2 Control
Web-based version
User Manual
v.1.0.4
Rev.2017-2021
Important: Flatpack2 Control AC cable is NOT INCLUDED into assembly. Please purchase yourself AC
cable required for your country/region and wire it in accordance with PCB marking: L, N and Ground.
Incorrect wiring of AC cable will highly possible damage Flatpack2 and Flatpack2 Control.
Important: DC connector is not included into the assembly. Correct connector should be purchased and
soldered/screwed separately in accordance to your application. PCB is designed to support wide variety
of DC connectors. Alternatively, DC wires can be soldered directly to the PCB:
To Next Page
Need help?
General
