38
5.6 Wiring up Current Loop Sensors driven by the
Squirrel
5.7 Wiring up an AC voltage input
AC inputs have 3 pin DIN sockets for connecting a range of different
sensors. Rogowski coils, Voltage Transducers and Current Transducers
can be connected to any of the AC voltage inputs. Some inputs also allow
thermistors to be connected. For 1010/1020 electricity loggers see also
section 8.
Sensor output thermistor
sensor
AC
Note: the ‘-’ connection is ground and should be connected to the cable
screen, if any.
o cv
To Next Page
Loading...