ELTEX ESR-10 - Page 340

ESR series service routers.ESR-Series. User manual
340
•
•
•
•
•
•
Step Description Command Keys
8 Specify route target import for the given
VPLS instance.
esr(config-bgp)# route-target
import <RT>
<RT> – Route-target value,
specified in one of the
following forms:
<ASN>:<nn> — where
<ASN> may take values
[1..65535], nn may take
values [1..65535];
<ADDR>:<nn>— where
<ADDR> specified as
AAA.BBB.CCC.DDD/EE,
AAA-DDD may take
values [0..255], nn may
take values [1..65535];
<4ASN>:<nn>— where
<4ASN> may take
values [1..4294967295],
nn may take values
[1..65535];
9 Specify route target export for the given
VPLS instance.
esr(config-bgp)# route-target
export <RT>
<RT> – Route-target value,
specified in one of the
following forms:
<ASN>:<nn> — where
<ASN> may take values
[1..65535], nn may take
values [1..65535];
<ADDR>:<nn>— where
<ADDR> specified as
AAA.BBB.CCC.DDD/EE,
AAA-DDD may take
values [0..255], nn may
take values [1..65535];
<4ASN>:<nn>— where
<4ASN> may take
values [1..4294967295],
nn may take values
[1..65535];
10 Specify ve id. esr(config-bgp)# ve id <ID> <ID> — VPLS instance
identifier, specified in the range
[1..16384].
11 Specify vpn id. esr (config-bgp)# vpn id <ID> <ID> — VPN identifier, specified
in the range [1..4294967295]
12 Specify ve range (optional). esr (config-bgp)# ve range
<RANGE>
<RANGE> — range of VPLS
border device identifiers
[8..100].
13 Specify mtu (optional). esr (config-bgp)# mtu <VALUE> <VALUE> — MTU value
[552..10000].