____________________________________________________________________________________
____________________________________________________________________________________
NTU-2V, NTU-RG Optical Network Terminals 31
Click the Add button to add a new filtration rule.
– Filter Name – filter text description;
– IP Version – IP protocol version;
– Protocol – the network protocol selected;
– Source MAC address – source MAC address;
– Source IP address[/prefix length] – source IP address (prefix length can be specified after slash);
– Source Port (port or port:port) – source port(s);
– Destination IP address[/prefix length] – destination IP address (prefix length can be specified after
slash);
– Destination Port (port or port:port) – destination port(s);
WAN (configured in the router mode and having firewall enabled) and LAN Interfaces
– Select All – when set, allows selection of all available interfaces.
You can also select an interface from the list by setting a flag in front of it.
Click the Apply/Save button to accept and save the settings.