ELTEX NTU-RG-1402G-W User Manual

____________________________________________________________________________________
____________________________________________________________________________________
NTU-2V, NTU-RG Optical Network Terminals 7
– For NTU-2V models: 1 RJ-45 10/100 Base-T port, 1 RJ-45 10/100/1000Base-T port.
Wi-Fi transmitter/receiver
1
802.11ac
2
, 802.11n, 802.11b, 802.11g.
2 USB2.01 ports for connection of external drives such as USB and HDD.
The terminal uses an external adapter for 220 V / 12 V power supply.
The device supports the following functions:
Network functions:
bridge or router mode;
PPPoE support (PAP, CHAP, MSCHAP authentication);
support of static address and DHCP (DHCP client on WAN, DHCP server
on LAN);
UPnP;
IPSec;
NAT;
Firewall;
NTP;
QoS;
IGMP-snooping;
IGMP-proxy;
Parental Control;
Storage Service.
IP telephony:
SIP protocol;
audio codecs: G.729 (A), G.711(A/U), G.723.1;
ToS for RTP packets;
ToS for SIP packets;
echo cancellation (G.164, G.165 guidelines);
silence detector (VAD);
comfortable noise generator;
DTMF signals detection and generation;
DTMF transmission (INBAND, RFC2833, SIP INFO);
fax transmission: upspeed/pass-through. G.711, T.38.
Value added services:
Call Hold;
Call Transfer;
Call Waiting notification;
Forward Unconditionally;
Forward on "No Answer";
Forward on "Busy";
Caller ID Display for ETSI FSK;
Caller ID Barring (anonymous call);
Warmline;
flexible numbering plan;
voice mail notifications (MWI);
Anonymous Call Blocking;
Call Barring;
Do not Disturb (DND).
1
NTU-RG only
2
NTU-RG-1402G-Wac only

ELTEX NTU-RG-1402G-W Specifications

General

Brand	ELTEX
Model	NTU-RG-1402G-W
Category	Touch terminals
Language	English