ELTEX NTU-RG-1421G-Wac - NAT Submenu. NAT Settings; Virtual Servers Submenu. Virtual Server Settings

____________________________________________________________________________________
____________________________________________________________________________________
26 NTU Optical Network Terminals
– IP Address— device IP address
– MAC Address—МАС address
Click the Apply/Save button to accept and save the changes.
4.2.2 NAT submenu. NAT Settings
The use of the NAT settings can be efficient when the device operates in the router mode.
4.2.2.1 Virtual Servers submenu. Virtual server settings
Virtual Server is a router function designed to provide users with Internet access to servers located in your
local network, e. g. to mail servers, WWW, and FTP. A device may have up to 32 records. ‘NAT loopback’
function allows you to address local area network devices using their global addresses.
In order to add a record to the filtration table, click Add and fill in the fields of the displayed window.
– Utilized interface