ELTEX NTU-RG-1421G-Wac - Advanced Submenu

____________________________________________________________________________________
____________________________________________________________________________________
44 NTU Optical Network Terminals
In Wireless/Bridge mode, you can configure the following settings:
– Bridge Restrict—select bridge operation mode:
– Enabled—enable filtering for MAC addresses (only specified addresses are allowed)
– Enabled (scan)—search for remote bridges
– Disabled—no restrictions for MAC addresses
– Remote Bridges MAC Address—addresses of remote bridges
Router does not support the Wi-Fi Multimedia (WMM) function in the bridge mode.
Click Refresh to refresh information on available remote bridges.
Click the Apply/Save button to accept and save the changes.
4.3.5 Advanced submenu
Use this menu to configure advanced settings of the wireless network.