________________________________________________________________________________
_________________________________________________________________________________
Universal Network Terminal TAU-72.IP/TAU-36.IP 127
• tagged–packets will always be sent with VLAN tag by this port;
• not member–packets with specified VID will not be sent by this port (i.e. the port is not the member
of VLAN);
– override–when checked, override 802.1р priority for this VLAN; otherwise, leave the priority unchanged;
– Priority–802.1р priority assigned to packets by VLAN, if 'override' checkbox is selected;
Then, click the Add New Rule button.
To remove records, select checkboxes for the rows to be removed and click the Remove selected button.
Update Switch and Commit buttons allow to retain access to the gateway when switch settings are
applied. Click the Commit button in 30 seconds interval to confirm newly applied settings, or the previous
settings will be restored.
5.1.3.3 The 'QoS & Bandwidth control' submenu
In 'QoS & Bandwidth control' submenu, you may configure Quality of Service functions and bandwidth
restrictions.
– Default vlan priority–802.1р priority assigned to untagged packets, received by this port. If 802.1р or IP
diffserv priority is already assigned to the packet, this setting will not be used ('default vlan priority' will not
be applied to packets containing IP header, when one of the QoS modes is in use: DSCP only, DSCP preferred,
802.1p preferred, and also to untagged packets;
To Next Page
Loading...
