ELTEX TAU-36.IP - Basic Commands

________________________________________________________________________________
_________________________________________________________________________________
Universal Network Terminal TAU-72.IP/TAU-36.IP 161
0)
stopdial
-
priv
Dial stop by '#' symbol usage
(default: don't use)
Don't use dial stop by '#'
symbol
6.1.1 Basic commands
do
Executing the top level command
Syntax.
do <command>
Parameters
command – EXEC level command
Privilegy
priv
Command mode
CONFIG, CONFIG-NETWORK, CONFIG-SIP, CONFIG-VOICEPORT, CONFIG-VOICEPROFILE
Example
tau-72(config)# do show ipaddr
IP address eth0: 192.168.118.119
exit
Command is designed to exit the configuration mode
Syntax.
exit
Parameters
Command contains no arguments.
Privilegy
priv
Command mode
CONFIG, CONFIG-NETWORK, CONFIG-SIP, CONFIG-VOICEPORT, CONFIG-VOICEPROFILE
no
Negotiation command.
Syntax.
no <command>
Parameters
<command> - command Executes for command negotiation or default value setting
Privilegy
priv