ELTEX TAU-36.IP - 10 Appendix J. Processing of Info Requests Containing Application;Broadsoft and Application;Sscc and Used for; Appendix K. Description Events Sent by the Trap, Trapv2, Inform Messages

APPENDIX K. DESCRIPTION EVENTS SENT BY THE TRAP, TRAPV2, INFORM MESSAGES
1. The format of the values used in the messages Trap, Trap V2, Inform
The format of the transmitted values consists of two parts: %X and $Y, where %X - the number parameter according to the structure of the ladder, $Y - type output value.
The structure of information transmitted in messages Trap, Trap V2, Inform
Name
OID
Description
mcTrapExState
1.3.6.1.4.1.35265.3.5.1
LED/Status
mcTrapLParam1
1.3.6.1.4.1.35265.3.5.2
Parameter 1
mcTrapLParam2
1.3.6.1.4.1.35265.3.5.3
Parameter 2
mcTrapLParam3
1.3.6.1.4.1.35265.3.5.4
Parameter 3
mcTrapID
1.3.6.1.4.1.35265.3.5.5
Identifier
mcTrapDescr
1.3.6.1.4.1.35265.3.5.6
Description
mcTrapRestoredAlarmID
1.3.6.1.4.1.35265.3.5.7
If this event recovery, whereas here the identifier of the accident. If this is an emergency
event, then here it is transmitted to 0.
mcTrapSyncType
1.3.6.1.4.1.35265.3.5.8
Type: 0 - Normal; 1 - inactive accident; 2 - active accident
mcReservedFlag
1.3.6.1.4.1.35265.3.5.9
Reserve
The value of variable %X contained in the description of the alarm corresponds to the structure of the following descriptions:
%1 –param1
%2 –param2
%3 –param3
%5 –description
Value Types of $Y:
$d – integer
$s – string
2. Description of the messages transmitted TAU