ELTEX TAU-36.IP - Appendix C. General Device Setup;Configuration Procedure

________________________________________________________________________________
_________________________________________________________________________________
Universal Network Terminal TAU-72.IP/TAU-36.IP 269
APPENDIX C. GENERAL DEVICE SETUP/CONFIGURATION PROCEDURE
1. Using Ethernet cable, connect gateway Ethernet port to your local area network;
2. Device configuration is performed via WEB interface (see Paragraph 5.1 of this manual) using a web browser
(e.g. Internet Explorer, Mozilla Firefox, Opera, Google Chrome). Initial connection to the gateway is
performed by IP address, specified by the manufacturer (see documentation).
– In WEB configurator, specify the following settings in 'Network settings -> Network' menu section:
• Device IP address corresponding to the established addressing in your network—'IP address' field;
• Subnet mask—'Netmask' field;
• Network gateway address—'Default gateway'.
– Or you can use TAU-36/72.IP as a DHCP server client in order to obtain IP address automatically: in 'Network
settings -> Network' menu section, select 'Use DHCP' checkbox, and set the flag 'Get GW via DHCP'.
3. We highly recommend changing default password after device installation in 'Service ->Password' menu
section;
Make sure to apply changes with 'Submit Changes' button, located in the bottom of the page.