ELTEX TAU-36.IP - Page 135

________________________________________________________________________________
_________________________________________________________________________________
Universal Network Terminal TAU-72.IP/TAU-36.IP 135
5.1.4.3 The 'Switch' submenu. Switch port status monitoring
In 'Switch' submenu, you may view status of integrated Ethernet switch ports.
The switch is equipped with 3 Gigabit Ethernet electrical ports (Port 0, Port 1, Port 2), 1/2
1
optical port (SFP 0,
SFP 1), designed for connection to data networks and additional Ethernet devices, and 1 internal CPU port for
connection to TAU HOST processor.
– Link–port state:
• off–port is inactive (no connection);
• on–port is active (connection established).
– Duplex–transceiver operation mode:
• N/A–value is not available, as the link is inactive;
• Full–full duplex;
• half–half-duplex.
– Speed–data transfer rate for a port (10 Mb, 100 Mb, 1000 Mb):
• N/A–value is not available, as the link is inactive;
• 10 Mb, 100 Mb, 1000 Mb.
1
For TAU-72.IP/TAU-36.IP v1, v2 appears status of one optic Ehernet port.