_________________________________________________________________________________
Universal Network Terminal TAU-72.IP/TAU-36.IP 167
show version
The command is intended for viewing configuration file version.
Syntax.
show version
Parameters
Command contains no arguments.
Privilegy
none
Command mode
EXEC
Example
tau-72> show version
Config version: 1.0
show configuration
The command is intended for viewing whole configuration.
Syntax.
show configuration
Parameters
Command contains no arguments.
Privilegy
priv
Command mode
EXEC
Example
tau-72# show configuration
================start dump config================
node: config.Network.network
IPADDR: 192.168.118.119
NETMASK: 255.255.255.0
GATEWAY: 192.168.18.1
...
| Press any key to continue | Press 'q' to exit |