ELTEX TAU-36.IP - Page 178

_________________________________________________________________________________
_________________________________________________________________________________
178 Universal Network Terminal TAU-72.IP/TAU-36.IP
test voiceport
The command is intended for testing the voiceport.
Syntax.
test voiceport <value>
Parameters
<value>-number:1-36
1
Privilegy
priv
Command mode
EXEC
Example
tau-72# test voiceport 2
waiting result...
RING ext -0.37, V, TIP ext -0.37, V
Vbat. -31.45, V, Vring1. nan, V, Vring2 nan, V
res T-R. 950.41, kOm; res T-G. 471.79, kOm; res R-G 670.24, kOm
cap T-R. 0.00, mkF; cap T-G. 0.00, mkF; cap R-G 0.00, mkF
end testing, result '0'
reboot
The command is intended for rebooting the device.
Syntax.
reboot <confirm>
Parameters
< confirm > – yes/no
Privilegy
priv
Command mode
EXEC
Example
tau-72# reboot
Do you really want to restart device? (yes/no)
route add
The command is intended for adding the route rule.
Syntax.
route add <value1> netmask <value2> gateway <value3>
1
For TAU-36.IP. For TAU-72.IP parameter value: 1-72