ELTEX TAU-36.IP - Page 19

________________________________________________________________________________
_________________________________________________________________________________
Universal Network Terminal TAU-72.IP/TAU-36.IP 19
Comprehensive protective circuit
Comprehensive protective circuit (current and voltage).
To protect subscriber line surge linear side
cross must be equipped with a three-pole
arresters voltage 230V operation.
Recommended arresters company KRONE 'МК, 230 V'
with heat protection spring.
Remote measurement of parameters of the subscriber line
yes
Parameters set
programmable
Console parameters
RS-232 serial port
Data rate, bps
115200
Electrical parameters of signals
According to ITU-T Recommendation V.28
Network and Configuration
Connection types
Static IP, DHCP client
Management
WEB, RS-232 console, Telnet, SSH
Security
User name and password verification, HTTPS, FTPS
Physical specifications and ambient conditions
Power voltage
V1.0, V2.0, V3.0
V4.0
rev.B
DC: -36..- 60V
DC: -36..- 60V
DC: -36..-72V
AC: ~150-250V 50 Hz
When using small
unventilated cabinet
(hallway installation)
permissible payload is 0.4
Erl./port.
If you use mechanical ventilation
of the cabinet, it is possible to
operate at
heavy load.
Power consumption without active subscribers
30 W
Current consumption of active subscriber set
30 mA
Operating temperature range
From 0 to 40°C
Relative humidity
Up to 80%
Ambient noise
Launch and operational mode: 0 dB
After processor heating: 50 dB
Dimensions (W x H x D)
420х45х240 mm, 19' form-factor, 1U size
Weight
3.2 kg