ELTEX TAU-36.IP - Page 220

_________________________________________________________________________________
_________________________________________________________________________________
220 Universal Network Terminal TAU-72.IP/TAU-36.IP
Privilegy
priv
Command mode
CONFIG-VOICEPORT, CONFIG-VOICEPROFILE
Negotiation function 'no' command
Set amplifying/attenuating of signal in receiving circuit to default.
Example
tau-72(config-voice-port)# hybrid rx -20
hybrid tx
The command is intended for setting signal amplifying/attenuating in transmission circuit.
Syntax.
hybrid tx <value>
Parameters
<value>.number: -170..60 (default: 0)
Privilegy
priv
Command mode
CONFIG-VOICEPORT, CONFIG-VOICEPROFILE
Negotiation function 'no' command
Set amplifying/attenuating of signal in transmission circuit to default.
Example
tau-72(config-voice-port)# hybrid tx 20
stopdial
The command is intended for enabling dial stop using # character.
Syntax.
stopdial
Parameters
Command contains no arguments.
Privilegy
priv
Command mode
CONFIG-VOICEPORT, CONFIG-VOICEPROFILE
Negotiation function 'no' command
Don't use dial stop by '#' symbol.
Example
tau-72(config-voice-profile)# stopdial