S
AE J1772 compliant charging plug
208-240 Vac, single
phase, 30 A max., 60 Hz
208-240 Vac, single
phase, 40 A max., 60 Hz
Wiring for
hardwired models
L1, L2, and Ground, hardwired with terminal block; bottom-fed
Wall plug for cord
connected models
208-240 Vac, single
phase, 30 A max., 60 Hz
208-240 Vac, single
phase, 40 A max., 60 Hz
Embedded non-revenue grade meter with 1% accuracy
208-240 Vac, single
phase, 30
A max., 60
Hz, 7.2 kW
208-240 Vac, single
phase, 40 A max., 60
Hz, 9.6 kW
Internal residual
current detection
2-pole 40 A breaker on
dedicated circuit,
non
-
GFCI type
2-pole 50 A breaker on
dedicated circuit,
non-GFCI type
Over current, short circuit, over voltage under voltage, ground fault, surge
protection, over temperature
AC present, charging, fault
Charger on/off, stop charging
Option: Network
interface
-22 °F to +122 °F (-30 °C to +50 °C)
95% related humidity, non-condensing
18 ft (5.5 m) straight cable
12.6 x 10.3 x 4.5 in (320 x 260 x 115 mm), excluding charging cable, mounting
plate and cable holder
5 lbs (2 kg) excluding charging connector and cable
Specifications
Installation-manual_CH-211
v1.0.4
C
H-21130 CH-21140