Elvaco CMe3100 DLMS Plugin - Event Triggered Push of Data

To Next Page

To Previous Page

CMe3100 DLMS Plugin User's Manual

page | 42 (48)

2022-02-23

Version 1.8

<octet-string>timestamp of the event</octet-string>

<octet-string>OBIS code of the event object</octet-string>

<unsigned>event code</unsigned>

Optionally, it may also contain another item:

<visible-string>custom event message</visible-string>

OBIS codes used:

Timestamp: 0.0.1.0.0.255

Event object: 0.0.96.11.0.255 (Standard), 0.0.96.11.1.255 (Fraud)

Custom event message: 0.128.96.11.0.255 (Standard), 0.128.96.11.1.255 (Fraud)

7.6.2 Event triggered push of data

7.6.2.1 Push On-Installation Event

This event is triggered when the meter list of a gateway is changed. The event triggers a push

with the event code On-Installation, which can be used by the HES to trigger a poll operation to

update the meter list (read meter list from the gateway).

The gateway will only trigger a single push, even if more than one meter is added/removed

during an operation. The hysteresis for grouping the event is three (3) minutes.

The payload of the Data Notification APDU has the following structure:

<octet-string>COSEM logical device name of the gateway</octet-string>

<octet-string>COSEM logical name of the push setup – on installation

object</octet-string>

<double-long-unsigned>ip adress of the gateway</double-long-unsigned>

<octet-string> System title of the gateway as defined in [4] 6.1.1</octet-

string>

The OBIS code for the push setup – on installation object is fixed to 0-7:25.9.0*255 (see [4],

section 7.2.1).