Elvie Stride 2 - Page 9

9
• Do not try to express yourself with an intensity setting
that is too high or uncomfortable. Contact your healthcare
professional if you express minimal or no milk, or if
expression is painful.
• If your breast becomes swollen, hot and/or painful, please
seek immediate advice from your healthcare professional.
• If the package appears damaged, the tamper-proof tear strip is
removed and/or otherwise tampered with before use, do not
use and contact our Customer Care team via elvie.com.
• Never operate an Elvie Stride 2 if it has been damaged,
is not working properly, or has been dropped into water.
If damage is found, immediately discontinue use and contact
our Customer Care team using the details at the front of the
guide. In case of damage or wear, please replaceparts.
• Always inspect all parts before use for damage, liquid and
cleanliness and disinfect washable components that come
into contact with your breast and breast milk prior to first use.
• Wash your hands thoroughly with soap and water before
touching Elvie Stride 2, its components or your breasts.
Avoid touching the inside of the Cup Fronts, the Breast
Shields and Nipple Inserts.
• Regularly check that there is no residue or condensation in
the Tubes. The Tubes must be completely dry before assembly;
residue or condensation can be drawn into the Elvie Stride
Hub, which could cause product failure. If there is milk in the
Tubes discontinue use, check the Diaphragm for damage
and contact Customer Care. If mold develops in the Tubes,
discontinue use and replace.
• Only use drinking-quality tap water or bottled water for
cleaning components that come into contact with milk.
• Do not immerse the Hub, Tubes, Tube Splitter or Cap in
water or other liquids. It may be dicult to dry and may risk
liquid being sucked into the Hub. Instead wipe with a clean
paper towel or soft cloth after each use. The Hub should
be disinfected with a low-level disinfectant such as ethyl
or isopropyl alcohol (70-90%).
• Do not use harsh chemicals to clean the Breast Shield,
Cup Front, Cup Seal, Valve, Diaphragm, or Nipple Inserts.
• Do not store wet or damp parts, as mold may develop.
• Clean all parts that come into contact with your breast and
breast milk, and inspect for damage after every use.
• Do not drop or insert any foreign object into any openings on
the Hub and always close the Charging Cap after charging.
• Elvie Stride 2 uses Bluetooth technology. Please follow airline
rules for the use of portable electronic devices when flying.
Furthermore, high altitudes, including while in a pressurized
aircraft cabin, will aect the performance of ElvieStride 2.
• Elvie Stride 2 operates within the 2.402-2.480GHz unlicensed
ISM frequency band(s) and is limited to a maximum of 3dBm
output power transmitted in the frequency band(s) in which
the radio equipment operates.
• Portable and mobile frequency communications equipment
can aect the breastpump.
• Elvie Stride 2 must only be used with chargers that are fully