Elvie Stride 2 - Getting Ready

10
compliant with the relevant USB Specifications: USB 2.0
(5V, 500mA), USB 3.0/3.1 (5V, 900mA), USB Battery Charging
(BC) 1.2 (5V, 1.5A). If you already have a charging adapter at
home, we recommend checking that the output voltage /
current or power is in the range stated above. The charging
adapter should also contain a country specific standards
mark such as:
• It is recommended to use an adapter compatible with both
IEC 60601-1 and your regional power source and that it is
double insulated (Class 2 electricalcertification).
• Do not use flammable materials while using Elvie Stride 2
or connecting Elvie Stride 2 to a Charger.
• Elvie Stride 2 will not work when connected to the charger;
always disconnect Elvie Stride 2 from the charger and close
the Charging Port.
• Discontinue use if you notice a loss of power or if the fully
charged battery lasts for less than two hours of continuous
use. The battery is not replaceable.
• It is recommended that you keep your Elvie Stride 2 up
to date by periodically switching it on and connecting
to the Pump with Elvie app when not in regular use.
• Elvie Stride 2 and its components are not heat resistant.
Keep away from heatsources.
• Do not expose Elvie Stride 2 or its components to direct
sunlight.
• Do not place the Hub in the fridge or freezer.
• If stored at minimum or maximum storage temperature
(see Product specifications), when removing from storage,
please allow 24 hours for the pump to reach normal
operating temperature before use.
• Do not use Elvie Stride 2 while sleeping or overly drowsy.
• Elvie Stride 2 is not to be used when lying down or sleeping
to ensure proper orientation during use, whilst engaging
in strenuous activities or performing activities with risk of
harm such as operating heavy machinery. Do not pump while
driving. Do not wear Elvie Stride 2 when not pumping.
• Do not attempt to reset the Hub during use.
• Close supervision is necessary when the breast pump or
accessories are used in the vicinity of children. Parts of the
breastpump may pose a risk of strangulation when being
played with and small parts may be swallowed by children.
Keep out of reach of children.
• Cup Front markings are for indication only.
Please visit elvie.com for troubleshooting advice, including
alerts, warnings and how to factory reset Elvie Stride 2.
Please keep a copy of these instructions for future reference.
4. Getting ready
This guide will show you how to assemble your pump and how to customize
it to fit your body.