Need help?Do you have a question about the elysia nvelope and is the answer not in the manual?
General| Type | Transient Shaper |
|---|---|
| Channels | 2 |
| Input Impedance | 10 kOhms |
| EQ | No |
| Maximum Input Level | +21 dBu |
| Maximum Output Level | +21 dBu |
| Dynamic Range | 120 dB (A-weighted) |
| Output Impedance | 50 Ohms |
| Form Factor | Rackmount |
| Dimensions | 19" x 1U |
Safety warnings regarding electric shock, chassis opening, and service.
Guidelines on temperature, ventilation, humidity, and proper connection/mounting.
Controls for adjusting signal attack, sustain, and associated frequency points.
Switches for selecting EQ, Full Range, Dual Band modes, and Stereo Linking.
Controls for channel activation, bypass, and automatic peak reduction.
Details XLR and 1/4" phone jack connections for audio signals.
Information on mains connector, power switch, fuse holder, and voltage selection.
Specifies pin configurations for balanced and unbalanced XLR and jack connections.
Details frequency response, THD+N, noise floor, and dynamic range.
Specifies maximum input/output levels and impedance values.
Confirms compliance with the Restriction of Hazardous Substances directive.
Outlines copyright, reserved rights, and usage restrictions for the manual.
To Next Page
