38
GB
TRANSLATION OF ORIGINAL INSTRUCTIONS
INTRODUCTION
For correct use of the machine and to avoid
accidents, do not start working until you
have read this manual carefully. You will
find explanations concerning the operation
of the various parts plus instructions for
necessary checks and relative maintenance.
NOTE: The descriptions and illustrations
contained in this manual are not
binding. The manufacturer reserves the
right to undertake any modifications it
deems necessary without revising this
manual.
In addition to the operating instructions,
this manual contains paragraphs that
require your special attention. Such
paragraphs are marked with the symbols
described below:
WARNING: where there is a risk of an
accident or personal, even fatal, injury or
serious damage to property.
CAUTION: where there is a risk of
damaging the machine or its individual
components.
Lawn tractors with rear discharge are
manufactured in different versions. When
reading the following descriptions in these
instructions for use, make sure you are
referring to the appropriate description for
your lawn tractor.
WARNING
RISK OF HEARING DAMAGE
IN NORMAL CONDITIONS OF USE, THIS
MACHINE MAY EXPOSE THE OPERATOR
TO A PERSONAL DAILY NOISE LEVEL
EQUAL TO OR HIGHER THAN
85 dB (A)
CONTENTS
1. SAFETY PRECAUTIONS
(precautions for using the machine
safety) 39
2. SYMBOLS AND SAFETY
WARNINGS (explanations on how
to identify the machine and the
meaning of the symbols) 40
3. MAIN COMPONENTS (position of
the main parts that make up the
machine) 41
4. ASSEMBLY (explanations on how to
remove the packaging) 41
5. COMMANDS AND CONTROL
INSTRUMENTS (position and
function of all the controls) 41
6. INSTRUCTIONS FOR USE
(instructions for the effective and
safe use of the machine) 44
- 6.1 Preliminary Operations Before
Starting Work 47
- 6.2 Using the Machine 49
- 6.3 Grass Cutting 51
- 6.4 Transporting 54
7. MAINTENANCE (all information
required to keep the machine at
peak efficiency) 55
- 7.1 Safety Recommendations 55
- 7.2 Access To Mechanical Parts 55
- 7.3 Routine Maintenance 55
- 7.4 Interventions On The Machine 58
8. ENVIRONMENTAL PROTECTION
(advice on using the machine in
ways that respect the environment) 59
9. ACCESSORIES (descriptions of the
accessories available for particular
types of work) 60
- 9.1 Optional accessories on request 60
10. TECHNICAL DATA (a summary of
the main specifications of the
machine) 62
11. DECLARATION OF CONFORMITY 63
12. WARRANTY CERTIFICATE (a
summary of the warranty
conditions) 64
13. TROUBLESHOOTING (helps you to
quickly solve any problems you may
encounter while using the machine) 65
To Next Page
Loading...
Need help?
General
