GUIDE TO SCHEDULED MAINTENANCE
This table is to help you maintain your machine’s safety and performance. It
shows the main maintenance and lubrication work, indicating the frequency with
which it should be carried out.
To the right of each one there is a box where you can write the date or after how
many hours of operation the work was carried out.
WORK HOURS DATE OR N° OF HOURS
1. MACHINE
1.1 Check of tight fixing and sharpness of blade 25
1.2 Blade replacement 100
1.3 Check of the transmission belt 25
1.4 Transmission belt replacement
2)
–
1.5 Checking the blade drive belt 25
1.6 Blade drive belt replacement
2)
–
1.7 Check and adjustment of brake 10
1.8 Check and adjustment of drive 10
1.9 Check blade engagement and brake 10
1.10 Check of tight fixing of all the elements 25
1.11 General lubrication
3)
25
2. ENGINE
1)
2.1 Engine oil change .....
2.2 Check and cleaning of air filter .....
2.3 Air filter replacement .....
2.4 Check of fuel filter .....
2.5 Fuel filter replacement .....
2.6 Check and cleaning of spark plug points .....
2.7 Replacement of spark plug .....
1)
See the engine booklet for a full list and methods of work.
2)
If worn, immediately contact a Licensed Service Centre for the replacement.
3)
General lubrication should be carried out whenever the machine is to be left
unused for a long period.
ENG 38 MAINTENANCE
To Next Page
Loading...
Need help?
General
