embrace No Code - Page 17

Language Selection
Step 1:
Press and hold the middle button to turn on the
meter.
Step 2:
Press the middle button once and arrow up or down until starts to
flash. The meter will announce “Language Selection.”
Step 3:
The default language ENGLISH is announced
(graph). Press the middle button and arrow up or
down to select another language. Press the mid-
dle button again when you have finished selecting
the language and exit language selection.
NOTE:
• Anytime during set up you can insert an Embrace No Code Test Strip
and begin testing. Any changes made so far are stored.
• Your choice of language and volume settings will not be erased when
changing batteries.
Begin testing by inserting an Embrace No Code Blood Glucose Test
Strip (see page 28, Testing Your Blood Glucose) or press and hold the
middle button to turn off the meter.
Embrace N0 Code
Setting Up Your New System
17
PM