Caring for the Meter
40
Embrace N0 Code
Cleaning the Meter
• If the meter gets dirty, use a moist (NOT WET) lint-free cloth damp-
ened with a mild detergent.
• Do not get water inside the meter or hold it under running water.
• Do not use glass or household cleaners on the meter.
• Do not try to clean the test strip holder.
Storage and Precautions
• Handle the Meter with care - severe shock, such as dropping the
meter, could damage the electronics.
• The meter and test strips are designed to be used within the temper-
ature ranges between 50˚F~104˚F.
• Avoid leaving the meter in extremely hot or cold place, such as near
a heat source or in an extremely hot or cold car.
• Do not store or use the meter or test strips in high humidity levels,
such as bathroom or kitchen.
• Always close bottle cap immediately after removing a test strip and
make sure it’s closed tightly.
• Do not take the meter apart. Doing so will void the warranty. If there
are technical problems or questions, call our authorized dealer for
assistance.
To Next Page
Loading...
