WHEN the meter will speak… WHAT the meter will say…
Embrace N0 Code
Voice Function Table
21
During date and time setup,
setting up the Minutes
After finish setting up date and
time
Turning on or off alarm 1, 2, or 3
Setting alarm 1, 2, or 3
When sending data to PC
Finish sending data to PC
“Set Minutes”
“The date and time is (year)
(month) (date) (hour) (minutes)”
“Alarm (number) is on/off”
“Set Alarm (number)”
“Sending data to PC”
“Data transmission complete”
To Next Page
Loading...
