Step 4:
Gently bring the test strip and touch the drop of
blood at a slight angle. The test strip acts like a
straw to pull the blood in. Keep the test strip in the
blood drop until the meter beeps to indicate the
test strip has enough blood to test.
Step 5:
The screen will start to count down. After 6 sec-
onds, your glucose testing result will appear on the
meter display screen and announced verbally if
you have the talking feature turned on. Your test
result will be automatically stored into the meter
memory.
CAUTION:
• If you see “HI” or “LO” displayed, your blood glucose level may be
above 600 mg/dL or below 20 mg/dL. Test again using fingertip test-
ing, DO NOT test on forearm. If you still receive the same result, call
your physician or healthcare professional immediately.
Step 6:
Remove the used test strip into proper wastebasket. The meter will au-
tomatically shut off.
Step 7:
Remove the used lancet from your lancing device according to instruc-
tions and discard into proper wastebasket.
IMPORTANT:
• Discard used test strips and lancets according to your local disposal
regulations where applicable.
Embrace N0 Code
Testing Your Blood Glucose
34
To Next Page
Loading...
