Blood Glucose Monitoring System
9
CABLE ............... Indicates the Monitor is in data transfer mode to
PC*. *This function is not available yet.
MEM .................. Blood glucose readings are stored (see page 38).
ALARM .............. To set Alarm or indicates Alarm has been set (see
page 14).
CTL .................... This icon indicates a control solution test (see page
24). To view the control solution test (see page 38).
BATTERY .......... Appears when batteries need to be changed (see
page 41).
HORN ................ Beeps when voice is turned off. Set sound volume
(see page 16).
TEMPERATURE
.. Appears when it is either too hot or too cold to test
(outside the ranges of 50°F~104°F).
CLOCK .............. Indicates the Monitor is ready to set up the year,
date and time (see page 11).
UNITS ................ Unit of measurement for your blood glucose is mg/
dL.
TEST STRIP ...... Flashes to prompt you to insert a test strip for
testing.
BLOOD DROP and ARROW
........................... Indicates the Monitor is ready for testing.
LANGUAGE SELECTION
........................... Indicates the language selection (see page 17).
To Next Page
Loading...
