Blood Glucose Monitoring System
43
Cleaning the Monitor
• If the monitor gets dirty, use a moist (NOT WET) lint-free cloth
dampened with a mild detergent
• Do not get water inside the monitor or hold it under running water
• Do not use glass or household cleaners on the monitor
• Do not try to clean the test strip holder
Storage and Precautions
• Handle the monitor with care- severe shock, such as dropping the
monitor, could damage the electronics
• The monitor and test strips are designed to be used within the
environment between 50°F~104°F and relative humidity less than
85%.
• Avoid leaving the monitor in extremely hot or cold places, such as
near a heat source or in an extremely hot or cold car
• Do not store or use the monitor or test strips in high humidity levels,
such as bathroom or kitchen
• Always close bottle cap immediately after removing a test strip and
make sure it’s closed tightly
• Do not take the monitor apart. Doing so will void the warranty. If
there are technical problems or questions, call Omnis Health at
1-877-979-5454 for assistance.
To Next Page
Loading...
