EMC-PARTNER IMU4000 - Default Chapter; Table of Contents

IMU4000
3/104
Contents:
1 DESCRIPTION 9
1.1 The interference sources of the transients 9
1.1.1 Electrostatic discharge ESD 9
1.1.2 Switched inductance EFT (Burst) 9
1.1.3 Indirect lightning SURGE 10
1.1.4 Voltage interruptions, Dips 11
1.1.5 How ESD, EFT, SURGE DIPS differ 11
1.1.6 Common mode disturbances in the frequency range 0 Hz to 150 kHz 12
1.2 Overview of the IMU4000 test system 12
1.2.1 IMU4000 12
1.2.2 ESD - IMU4000 System overview 14
1.2.3 EFT - IMU4000 System overview 14
1.2.4 SURGE - IMU4000 System overview 15
1.2.5 DIPS and Interruption – IMU4000 System overview 15
1.2.6 Magnetic fields - IMU4000 System overview IEC 61000-4-8 Ed.2 16
1.2.7 Magnetic fields - IMU4000 System overview IEC 61000-4-9 Ed.1 16
1.3 Technical data of the IMU4000 17
1.3.1 Electrostatic discharges ESD only valid with EXT-TRA3000 E 17
1.3.2 Electric Fast Transient EFT EXT-IMU4000 F5 18
1.3.3 Coupling / De-coupling Network EFT 18
1.3.4 Lightning and switching actions SURGE (IEC 61000-4-5 Ed.3) 20
1.3.5 Coupling / De-coupling Network „CDN-SURGE“ 20
1.3.6 Power voltage limits on direct output used together with external SURGE CDN 21
1.3.7 Voltage interruption and Variation with internal Variac EXT-TRA3000 D-V 21
1.3.8 Interruption and Voltage Variation IEC 61000-4-11 Ed.2 with external Variac 22
1.3.9 DIPS circuit in accordance with IEC 61000-4-29 for d.c. power ports. 22
1.3.10 Synchronisation of IMU4000 to mains frequencies 23
1.3.11 Measuring circuit, measuring outputs 23
1.3.12 Trigger Output Levels 24
1.3.13 Control 24
1.4 Mechanical dimensions 25
1.5 Power Consumption 25
1.6 Included articles, dimensions 25
1.7 Standard accessories 26
2 SAFETY 27
2.1 Safety standard 27
2.2 Climatic Conditions 27
2.3 Precautionary measure during use 28
2.4 Electromagnetic Compatibility 28