EMC-PARTNER IMU4000 - Page 4

IMU4000
4/104
2.5 The manual is an integral part of the equipment. Refer to the manual. 28
2.6 Sécurité 29
2.6.1 Normes de sécurité 29
2.6.2 Conditions climatiques 29
2.6.3 Mesures de précaution lors de l'utilisation 30
2.6.4 Compatibilité électromagnétique 30
2.6.5 Le manuel fait partie intégrante de l'équipement. 30
2.7 Sicherheit 31
2.7.1 Sicherheit Standard 31
2.7.2 Klimatische Bedingungen 31
2.7.3 Vorsichtsmassnahmen während dem Betrieb 32
2.7.4 Elektromagnetische Verträglichkeit 32
2.7.5 Dieses Manual ist Bestandteil von IMU4000 und dessen Testumgebung. 32
3 MECHANICAL STRUCTURE 33
3.1 General 33
3.2 Impulse-forming Networks 34
3.3 Measuring Circuit 35
3.4 Coupling / De-coupling Network CDN 35
3.5 EUT power supply at DIPS 35
4 CONTROL PANEL 37
4.1 Front panel of the IMU4000 37
4.1.1 Control part 37
4.1.2 Operation panel 39
4.2 Rear Panel of the IMU4000 41
5 PREPARATION FOR OPERATION 45
5.1 Attention, Refer to Manual 45
5.2 Operators and Service Personnel 45
5.3 Checks before operation 45
5.3.1 Optical verification of the IMU4000 Generators 45
5.3.2 Power source check 45
5.3.3 Connecting the IMU4000 Generator to the power line 45
5.3.4 EUT Power, Power source for the EUT 45
5.3.5 EUT Power with voltages different from the public power line (Variac) 47
5.4 EUT Power, supply of the EUT with dc 48
5.4.1 SURGE superimposing on dc 49
5.5 Hints for the test set up according to IEC standards 50