EMC CLARiiON DAE2P Replacing Manual

CLARiiON® Storage Systems
Replacing a DAE2P/DAE3P
LCC Module
March 29, 2010
This document describes how to replace a link control card (LCC) in a
CLARiiON® storage system DAE2P or DAE3P disk-array enclosure (DAE).
Topics include:
 Handling field replaceable units (FRUs).......................................... 2
 Removing an LCC......................................................................... 4
 Installing an LCC .......................................................................... 6
 Verifying the operation of a new or replacement part using
Navisphere Manager..................................................................... 8
 Returning the failed part................................................................ 9
1

EMC CLARiiON DAE2P Specifications

General

Model	DAE2P
Type	Disk Array Enclosure
Form Factor	2U
Drive Bays	15
Hot Swappable	Yes
Supported Drives	Fibre Channel, SATA
Maximum Capacity	Varies based on drive size
Connectivity	Fibre Channel
Interface	Fibre Channel
Redundancy	Dual power supplies
Compatibility	EMC CLARiiON CX4 series