l
Final 2-site topology
After migration, the new primary array is mirrored to the original secondary array.
EMC support personnel are available to assist with the planning and execution of your
migration projects.
Figure 53 Migrating data and replacing the original primary array (R1)
Replacing R1 and R2 devices with new R1 and R2 devices
You can use the combination of concurrent SRDF and cascaded SRDF to replace both
R1 and R2 devices at the same time.
Data Migration
174 Product Guide VMAX 100K, VMAX 200K, VMAX 400K with HYPERMAX OS
To Next Page
Loading...
