EasyManua.ls Logo

EMC VMAX 100K - Environmental Errors; Environmental Errors Reported as SIM Messages; SIM Severity Alerts

EMC VMAX 100K
200 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Table 46 SIM severity alerts
Severity Description
SERVICE No system or application performance degradation is
expected. No system or application outage has occurred.
MODERATE Performance degradation is possible in a heavily loaded
environment. No system or application outage has occurred.
SERIOUS A primary I/O subsystem resource is disabled. Significant
performance degradation is possible. System or application
outage may have occurred.
ACUTE A major I/O subsystem resource is disabled, or damage to the
product is possible. Performance may be severely degraded.
System or application outage may have occurred.
REMOTE SERVICE EMC Customer Support Center is performing service/
maintenance operations on the system.
REMOTE FAILED The Service Processor cannot communicate with the EMC
Customer Support Center.
Environmental errors
The following table lists the environmental errors in SIM format for HYPERMAX OS
5977 or higher.
Note
All listed severity levels can be modified via SymmWin.
Table 47 Environmental errors reported as SIM messages
Hex code Severity level Description SIM reference code
04DD MODERATE MMCS health check error 24DD
043E MODERATE An SRDF Consistency Group
was suspended.
E43E
044D MODERATE An SRDF path was lost. E44D
044E SERVICE An SRDF path is operational
after a previous failure.
E44E
0461 NONE The M2 is resynchronized
with the M1 device. This
event occurs once the M2
device is brought back to a
Ready state.
a
E461
0462 NONE The M1 is resynchronized with
the M2 device. This event
occurs once the M1 device is
brought back to a Ready
state.
a
E462
Mainframe Error Reporting
Environmental errors 181

Table of Contents

Related product manuals