2.2. On the front On the front of the rack or of the rack or cabinet, pocabinet, position and align esition and align each bezach bezel to the front-mel to the front-mountingounting
brackets on the corresponding component.brackets on the corresponding component.
3.3. PresPress the bezel ints the bezel into the braco the bracket unket until it clicktil it clicks into placs into place as shown ine as shown in Fig
Figureure 29 o29 on pan pagege 4444..
Bezels have a lock built into them, so Bezels have a lock built into them, so you can opt to lock the you can opt to lock the bezels in place with the keybezels in place with the key
provided. To lock the bezel, insert the key and turn it one quarter turn clockwise.provided. To lock the bezel, insert the key and turn it one quarter turn clockwise.
4.4. RepRepeat steat steps 2 eps 2 and 3 fand 3 for the ror the remainemaining being bezelzels.s.
To Next Page
Loading...
