EMC VNX VNX5200 User Manual


The DC power for the Bezel Light Bar is The DC power for the Bezel Light Bar is carried by cables from the power supplcarried by cables from the power supply through a racky through a rack
rail to the Light Bar power connector.rail to the Light Bar power connector.
Figure 2
Figure 2 AdAdjujuststblbl e Rail Set e Rail Set and and LiLighght Bar t Bar PowPower Caber Cablele
Figure 3Figure 3 Rail Set Internal Rail Set Internal CableCable
A USB to A USB to mini phono jack connects from tmini phono jack connects from the power supply to a jack locatehe power supply to a jack located on the back of thed on the back of the
right rail.right rail.

EMC VNX VNX5200 Specifications

General

Model	VNX5200
Category	Network Hardware
Maximum Drives	125
RAID Support	RAID 0, 1, 5, 6, 10
Form Factor	2U
Storage Processor	Dual
Drive Types	SAS, SSD
Connectivity	Fibre Channel, iSCSI, FCoE
Redundancy	Yes
Storage Type	Block and File
Operating System	VNX Operating Environment